|
Stonco >
Accent >
Survi'VR SR6SW
|
Accent Lighting
|
|
Survi'VR Round 16” Shallow Wall Fixture (SR6SW)
|
|
|
|
Product Features
- Precision die-cast 380 alloy marine-grade aluminum back plate with cast-in mounting knock-outs.
- Finished in Duraplex II polyester powder coat.
- One-piece, injection molded and UV-stabilized polycarbonate face with snap-in, interlocking lens provision.
- Color molded into the polycarbonate face for durable, scratch-resistant finish.
- Locking recessed set screw at the 1:00 o’clock position is unobtrusive, securely locking the face and lens to the cast housing.
- Die-cut neoprene rubber gasket provides added protection against elements between back casting and mounting surface.
- Silicone rubber gasket seals optics/face styles to outer rim of back casting. Also acts as a shock absorber providing additional support against breakage.
- HID units equipped with magnetic ballasts.
- Compact Fluorescent units equipped with an electronic HPF ballast with 120-277 voltage sensing capability.
- Lens is a one-piece, injection-molded, UV-stabilized polycarbonate.
- Internal prisms re-direct the light minimizing hot spots and maximizing uniformity.
- Available in either clear prismatic or opal prismatic polycarbonate.
- Twist and seal construction locks the lens and face onto the back casting.
- Extruded silicone gasket provides a tight weather-resistant seal. Unique “shock and seal” design or Shock and Seal Impact System (S&S) provides a cushion that supports/seals the lens against the elements and also acts as a shock absorber to help reduce damage from impact to the unit face.
- HID units equipped with a precision die-form segmented reflector.
- Compact Fluorescent units equipped with a high reflectance white pan reflector system.
- Wall-mounted units equipped with additional kick plates to direct the light down and out into a Type III pattern with a minimum 4:1 spacing ratio.
- LifeLyte limited lifetime warranty.
- UL listed for wet locations.
|
Additional Resources
|
|
|
Downloads
|
|
Survi'VR
www.survivrseries.com
|
|
Product literature, specification sheets and certain photometric data require Adobe® Acrobat Reader for viewing. Check back to Stonco for product updates and news.
|
