PRODUCTS BY TYPE

Home > LED Lighting


LED Lighting


Fiberglass Sealtight (SLT)


SLT Specs
SLT X-Treme Specs
SLT LED Specs
Industrial

Fiberglass Sealtight (SLT)

One-piece fiberglass reinforced polyester housing is impact resistant, prevents rust and corrosion. Poured neoprene gasket bonded to housing provides protection against dust, dirt, moisture and other foreign elements. Also available with Philips X-Treme XLL Series T8 lamping with a 60,000 hour lamp life and LED with a 50,000 hour lamp life. Molded cam action latches tightly compress lens against gasketing, forming a continuous seal, while also allowing for ease of periodic maintenance. Fixture can be completely washed down and includes UL Wet Location label; NSF rated.

View full details



FloodPak Series (FPL)


FPL Specs
FPL LED Specs
Industrial

FloodPak Series (FPL)

The FloodPak Large is designed for taller mounting heights. It is a perfect blend of architectural design and performance, and can be surface mounted in various positions as a cutoff wallpack or tip it up 22.5° for forward throw with semi-cutoff. Tip it up 45° for floodlighting, or turn it over and use it for indirect/accent lighting. It can also be pole mounted or ground mounted using mounting accessories. Available with an LED source with an average rated life of 60,000 hours. UL wet location listed for above or below horizontal aiming. Complete with a UL approved mounting box rated for 90°C. Meets IESNA cutoff requirements.

View full details



Wallprism Series (WP/WPM)


WNPS Specs
WPM Specs
WP Specs
WP DB Specs
WP Induction Specs
WPM LED Specs
WP LED Specs
Industrial

Wallprism Series (WP/WPM)

The Wallprism Series includes four different sized surface mount HID/CF luminaires for security, accent and perimeter lighting. A patented catadioptic refractor redirects light to minimize glare, aligns optical center of lens and lamp for symmetrical light distribution. Sizes and maximum wattage range from WNPS (100W), WPM (300W), WP (500) and DB (400). Select models include high lumen output LEDs with 50,000 lifetime operating hours and induction that provides low maintenance and 100,000 lifetime operating hours.

View full details



Twilighter Series Wallprism (TLW)


TLW Specs
TLW LED Specs
Industrial

Twilighter Series Wallprism (TLW)

Twilighter Series Wallprism is excellent for security, accent and perimeter lighting. Applications include entrance ways, garages, tunnels, overpasses and alleys. It includes a vandal-resistant polycarbonate housing and aluminum reflector for smooth “down-and-out'' distribution. Also available with LED sources for a long life of 50,000 hours.

View full details



Lyte Cube (LCQ)


LCQ Specs
LCQ LED Specs
Canopy

Lyte Cube (LCQ)

LCQ Canopy/Area lights are recommended for ceiling or canopy mounted installations where heights do not exceed 15 feet. Typical areas include parking garages, shopping walkways, maintenance areas, industrial corridors, freezers, low-ceiling warehouses and storage or walk-up windows. Polycarbonate refractor provides beam control (55-60°) and glare-free illumination in IES Type V pattern with a 3.4 to 1 spacing ratio. Led version has individual precision optics collect and redirect light to optimize performance. LED have optical individual optics for light placement minimizing glare. LEDs have an average rated life of 60,000 hours.

View full details



Lyte Prism Series (LPQ)


LPQ Specs
LPQ PS Specs
LPQ LED Specs
LPQ IND
Canopy

Lyte Prism Series (LPQ)

LPQ Prism Area lights are available in HID, LED and long life induction. They are recommended for indoor applications where ceiling mounting heights do not exceed 15 feet, maintenance areas, corridors, wash rooms, storage area and, locker rooms. The upper refractor ring is designed to redirect 20% of the light upward to the ceiling, eliminating the “cavern effect'' and the remainder of the light is redirected down and out below 70° for even, optimally designed for parking with IES Type V pattern. Induction is 100,000 hours and LED is 60,000 lifetime hours.

View full details



Medium Cutoff Roadway Luminaire (MCL)


MCL Type II Specs
MCL Type III Specs
MCL Type IV Specs
MCL LED Specs (54 LEDS)
MCL Induction Specs
MCL LED Specs (49 LEDS)
Canopy

Medium Cutoff Roadway Luminaire (MCL)

MCL Cutoff Luminaire is ideal for any outdoor application where tight light control is needed to prevent glare and light trespass such as roadways and parking lots. One-piece hydro-formed reflector provides IES Types II and III distributions. Forward throw with precision-formed, segmented reflector is available. is also available in long-life LED with 60,000 hours and very-long life induction sources for 100,000 hours.

View full details



Silhouette Series (SSM)


SSM Specs
SSM LED Specs
Canopy

Silhouette Series (SSM)

Silhouette Series Architectural Cutoff Luminaire (SSM) is ideal for outdoor applications like roadways and parking lots where tight light control is needed to prevent glare and light trespass. The Silhouette is part of a family of luminaires allowing you to maintain continuity throughout your entire site. Mounting arrangements include round or square poles, walls, with many other accessories to add more mounting flexibility. The Silhouette is also available in long-life LED with 60,000 hours. It complies with IES requirements for full cutoff meeting all Dark Sky ordinances.

View full details



GP2 Series Floodlight (GP)


GP2 Specs
GP2 LED Specs
Flood

GP2 Series Floodlight (GP)

The GP2 Flood Series combines architectural design with on-site versatility and is designed for general purpose floodlighting installations. Applications include security, roadway, area, accent, facade, recreational fields, flagpole, and sign lighting. The GP2 Flood series is available with ED17 lamps for pulse start metal halide and B17 lamps for high pressure sodium up to 175 watts. Reflectors include general purpose, spot and cut-off optics for control of light trespass. IP65 Rated for extra protection against water, dust and debris, and can be aimed above or below horizontal. The LED version is available in 30 LEDs in either 40W or 60W configurations.

View full details



GP3 Series Floodlight (GP)


GP3 Specs
GP3 LED Specs
Flood

GP3 Series Floodlight (GP)

The GP3 Flood Series combines architectural design with on-site versatility and is designed for general purpose floodlighting installations. Applications include security, roadway, area, accent, facade, recreational fields, flagpole, and sign lighting. The GP3 Flood series is available with ED28 lamps for pulse start metal halide and ED18 lamps for high pressure sodium up to 400 watts. Reflectors include general purpose, spot and cut-off optics for control of light trespass. IP65 Rated for extra protection against water, dust and debris, and can be aimed above or below horizontal. The LED version is available in 49 LEDs and a 103W configuration.

View full details



EvoScapes LED Series (ES)


ES1 Specs
ES2 Specs
ES3 Specs
Flood

EvoScapes LED Series (ES)

The EvoScape Series is ideal for schools, malls, office buildings, industrial parks, hospitals, sports complexes, and commercial centers. Available in three architectural styles, luminaires have 54 high-output LEDs producing 4170 lumens. The light engine has a rated life of 60,000 hours and is UL 1598 wet location listed.

View full details



Decra LED (DLED)


DLED Specs
Flood

Decra LED (DLED)

Decra LED Series is part of a family of decretive highbays that offer exceptional lighting performance with contemporary styling. The LED series is sized for low task and accent lighting and is available in LED in 1100 lumens at 18 watts. Decra is an excellent choice for retail applications where appearance and performance are paramount. The Decra LED is designed around Philips LED remote phosphor technology.

View full details



LytePro Sconce (LP)


LP32 Specs
LP7 Specs
LP16 Specs
Surface Exterior

LytePro Sconce (LP)

LytePro Sconce luminaires are part of the LytePro Series that includes the LytePro Plus area fixture. The LytePro7, LytePro16 and LytePro32 wall units are available in illumination packages of 618 – 5,800 lumens and a long life cycle of 60,000 hours. The LytePro7 is ideally suited for egress areas like entrances and pathways while the larger LytePro16 is best on walls for perimeter and security lighting. LytePro32 is the largest of the sconces, providing illumination at mounting heights of 14' and taller'. Patent Pending Design; ETL tested suitable for wet location; 5 year limited warranty.

View full details



LED LytePlus (LLP)


LLP Specs
Surface Exterior

LED LytePlus (LLP)

LED LytePlus Undercabinet Task Light is very efficient, generates little heat and delivers high quality illumination. The body is extruded aluminum in white and brushed aluminum finishes with a prismatic glass lens. The slim profile design is available in 9”, 12”, 18” and 24” lengths. The LED LytePlus delivers even illumination with minimal glare. Five year warranty.

View full details



LED DockLyte (DL)


LED DockLyte Specs
Surface Exterior

LED DockLyte (DL)

The Crescent LED DockLyte is a direct replacement for 150 watt PAR dock fixtures and uses only 15 watts for the same illumination. Its innovative heat sink with water filled copper tubes strategically inserted for optimum heat dissipation. Features include an acrylic shatterproof lens, durable die cast aluminum head, and an infinitely adjustable stainless steel neck. The DockLyte is ETL Listed for damp locations and has a 5 year warranty.

View full details



Parking Garage LED (PGL)


PGL Specs
Surface Exterior

Parking Garage LED (PGL)

The PGL series luminaires combines traditional-value fixtures with advanced technology, and is recommended for indoor applications where ceiling mounting height does not exceed 15 feet. Typical applications include parking garages, freezers, storage areas and corridors. It lasts four times longer than standard MH and use up to 50% less electricity for the same lumen output. The high efficiency LEDs are coupled with precise optical control lenses located over each LED that deliver even illumination over the 60,000 hour L70 lifetime of the luminaire.

View full details



L-Bay LED Highbay Series (LB)


LB4 Specs
LB2 Specs
Industrial

L-Bay LED Highbay Series (LB)

The L-Bay LED highbay luminaire is offered in a two and four pod design. The 32 or 48 LED pods have multiple outputs of 6,750 to 22,500 lumens per fixture. The superior illumination and available distribution patterns provided by the L-Bay series makes it ideal for applications including cold storage, manufacturing, warehousing, big-box, institutional and industrial applications. High output LEDs with 32 or 48 per pod and each LED having its own optical lens for precise optical control in for wide, medium narrow or aisle distributions. 5 year warranty; ETL listing.

View full details



22GP LED Premium Grid Troffer (GP)


GP 2x2 LED Specs
Industrial

22GP LED Premium Grid Troffer (GP)

The 22GP LED premium grid luminaire is a solid state lighting platform sealed to protect the integrity of the optical system. It delivers high efficacy and long life with excellent energy savings. Philips LEDs are an excellent source for use with controls since frequent switching does not affect the life of the light source. The 22GP LED performs equally well in open areas as well as corridors. Lumen packages range from 2,300 to 3,800 lumens, providing flexibility to optimize light levels for a specific application. High efficiency LEDs have 50,000 hour rated life.

View full details



LytePro Plus Area Luminaire (LPP)


LPP Specs
Industrial

LytePro Plus Area Luminaire (LPP)

LytePro Plus area luminaires are part of the LytePro Series that includes the LytePro 7, 16 and 32 wall sconces, and has a life rating of 80,000 hours. Available in two sizes, the LytePro Plus is easily adaptable from wide area lighting to narrow pedestrian path illumination. It can be wall mounted using an optional adapter plate for perimeter lighting applications. The high initial lumen output of 10,292 – 21,237 is ideally suited for mounting heights 18’ and taller, complementing the LytePro wall sconce. 5 year warranty; ETL approved for wet locations, IP65 rating.

View full details



Designer Canopy LED Luminaire (DCL)


DCL Specs
Industrial

Designer Canopy LED Luminaire (DCL)

The DCL LED canopy luminaire is designed for applications requiring even illumination typically found at restaurants, loading docks, walkways or any other low to mid level ceiling. The high performance optics deliver 2,200 lumens with 35 input watts, and has an operating life of 50,000 hours.. The DCL replaces an existing metal halide system up to 100 watts, reducing energy consumption up to 65%.

View full details



Dusk-to-Dawn LED (DTD)


DTD LED Specs
Area

Dusk-to-Dawn LED (DTD)

The DTD LED luminaire is designed for area illumination, and can be installed on poles, buildings and walls delivering wide and uniform coverage. The high performance optics deliver 1,800 lumens with 30 input watts, and has an operating life of 50,000 hours, The DTD replaces an existing metal halide system up to 100 watts, reducing energy consumption up to 70%. Comes with a factory-installed photocontrol.

View full details